With TV powered ON press: [Menu] then [4], [7], [2], [5] on the remote.
Exit the service menu by twice pressing the [EXIT] key on the remote.
Subscribe to:
Post Comments (Atom)
Service Menu Access Codes for various Tv's.
WARNING!
Once you enter service mode the first thing you should do is record all the original values BEFORE you change anything! This is the only way to restore the television to its original (factory default) state.
Don't mess around with the service mode adjustments unless you know what you're doing and have the service manual to guide you.
Entering wrong values in some of these registers can permanently damage the EEPROM.
I will NOT be responsible if you use this information and mess up your TV!
Don't mess around with the service mode adjustments unless you know what you're doing and have the service manual to guide you.
Entering wrong values in some of these registers can permanently damage the EEPROM.
I will NOT be responsible if you use this information and mess up your TV!
Search This Blog
Tags
- CT-20G6 (1)
- CT-27SF14V (1)
- CT-27SF24V (1)
- CT-27SF34V (1)
- CT-27XF34CV (1)
- CT-31SF24V (1)
- CT-31XF24CV (1)
- CT-33SF24TV (1)
- CT-34WX50 (1)
- CT-F29992LV (1)
- CT-F29992V (1)
- CT-F29992VV (1)
- CT-F29992XV (1)
- CT21AM2(A) (1)
- GE (1)
- GE / RCA / PROSCAN (1)
- Hitachi (1)
- JVC (1)
- MAGNAVOX (1)
- Mitsubishi (4)
- Monitors (1)
- Panasonic (2)
- Philips (1)
- Plasma (1)
- Projectors (1)
- PROSCAN (1)
- RCA (1)
- rear-projection (1)
- Samsung (1)
- Sony (3)
- Sony Front Projectors (1)
- Sony Plasma Monitors (1)
- Symphonic (1)
- TEAC (1)
- Televisions (11)
- Toshiba (1)
- Toshiba Televisions (1)
- TS-5053 (1)
- TX-W28R3 (1)
- WS-xxx05 (1)
- WS-xxx07 (1)
- Zenith (1)
- Zenith Televisions (1)
Posts
No comments:
Post a Comment